Cumpara de la materialeelectrice.ro

2-conductor through terminal block; with lever and Push-in CAGE CLAMP®; 16 mm²; with test port; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 16,00 mm²; gray - Wago


2-conductor through terminal block; with lever and Push-in CAGE CLAMP®; 16 mm²; with test port; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 16,00 mm²; gray
18.74 Lei

Disponibil

(05-11-2024)
Cumpara de la materialeelectrice.ro

Produs vandut de materialeelectrice.ro

(0)

Review(s)

Verifica toate preturile pentru acest produs : click aici


Distribuie pe :


Descriere :

Cumpara 2-conductor through terminal wago de calitate.
Pe yeo poti sa gasesti cel mai bun pret pentru 2-conductor through terminal wago

Ratings per: IEC/EN 60947-7-1;
Tesiune nominala (III/3): 800
V
Tensiune nominala de supratensiune (III/3): 8; kV
Curent nominal: 76
A
Curent nominal 2: 90
A
Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3;
Tehnologie conexiune: Push-in CAGE CLAMP®;
Tip actionare: Push-in
Lever
Open Tool Slot;
Tip actionare 2: Push-in
Operating tool;
Connectable conductor materials: Copper;
Nominal cross-section: 16 mm²;
Solid conductor: 0,5 … 16 mm² / 20 … 6 AWG;
Solid conductor; Push-in termination: 2,5 … 16 mm² / 14 … 6 AWG;
Fine-stranded conductor: 0,5 … 25 mm² / 20 … 4 AWG;
Fine-stranded conductor; with insulated ferrule: 6 … 16 mm² / 10 … 6 AWG;
Fine-stranded conductor; with ferrule; Push-in termination: 6 … 16 mm² / 10 … 6 AWG;
Strip length: 18 … 20 mm / 0.71 … 0.79 inch;
Numar total de conexiuni: 2;
Total number of potentials: 1;
Numar nivele: 1;
Wiring type: Front-entry wiring;
Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via Push-in termination.;
Number of jumper slots: 2;
Latime: 12 mm / 0.472 inch;
Inaltime from upper-edge of DIN-rail: 36,9 mm / 1.453 inch;
Adancime: 91,5 mm / 3.602 inch;
Design: horizontal type;
Tip montaj: DIN-35 rail;
Marking level: Center/.
Ratings per: IEC/EN 60947-7-1;
Tesiune nominala (III/3): 800
V
Tensiune nominala de supratensiune (III/3): 8; kV
Curent nominal: 76
A
Curent nominal 2: 90
A
Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3;
Tehnologie conexiune: Push-in CAGE CLAMP®;
Tip actionare: Push-in
Lever
Open Tool Slot;
Tip actionare 2: Push-in
Operating tool;
Connectable conductor materials: Copper;
Nominal cross-section: 16 mm²;
Solid conductor: 0,5 … 16 mm² / 20 … 6 AWG;
Solid conductor; Push-in termination: 2,5 … 16 mm² / 14 … 6 AWG;
Fine-stranded conductor: 0,5 … 25 mm² / 20 … 4 AWG;
Fine-stranded conductor; with insulated ferrule: 6 … 16 mm² / 10 … 6 AWG;
Fine-stranded conductor; with ferrule; Push-in termination: 6 … 16 mm² / 10 … 6 AWG;
Strip length: 18 … 20 mm / 0.71 … 0.79 inch;
Numar total de conexiuni: 2;
Total number of potentials: 1;
Numar nivele: 1;
Wiring type: Front-entry wiring;
Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via Push-in termination.;
Number of jumper slots: 2;
Latime: 12 mm / 0.472 inch;
Inaltime from upper-edge of DIN-rail: 36,9 mm / 1.453 inch;
Adancime: 91,5 mm / 3.602 inch;
Design: horizontal type;
Tip montaj: DIN-35 rail;
Marking level: Center/


Uneori, aceste descrieri pot contine inadvertente. De asemenea, imaginea este informativa si poate contine accesorii neincluse in pachetele standard.
logo

  • Produsele tale vor fi disponibile pentru toti clientii nostri, in fiecare zi, pe yeo.ro
  • Vor fi promovate pe retele de socializare si bloguri
  • De asemenea, vom crea continut video pentru 20 de produse