The new reference integrated amplifier from Densen is perhaps the most advanced integrated amp on the market.
The DenLink / Multiroom.
It will be possible to have full display information in another room, with status on all products.
On the B-150PLUS, the link system will allow the user to power up a link amplifier in the kitchen, or another room, and then control the main system in for example the living room, sending the signals to and from the kitchen, for playback in another room.
The SAXO crossover will fit all passive speakers on the market.
The DenLink system implemented in all Densen products allows 2-way communication in multiroom installations.
This is done by mounting the crossover internally in the B-150PLUS in a socket.
The B-150PLUS is also prepared for the SAXO electronic crossover, so that the B-150 can be used in active systems.
There is also the possibility of upgrading the B-150PLUS with the DNRG external power supply to further enhance the sound quality, so as to experience truly breathtaking musical experiences.
The printed circuit board is made of Teflon, and is double sided to allow for the signal on one side and the ground plane on the other, thereby optimising interference free signal transfer.
The B-150PLUS contains sockets for the SB Board for surround, DP-03 and DP-06 MM and MC stages.
As a result of the new winding method the transformer in the B-150PLUS is extremely stiff, which means that the voltage does not drop under large current deliveries.
Transformers normally lower the voltage during the delivery of large amounts of current which results in compression of the signals dynamics.
It also works as an isolation transformer, thereby eliminating the need to use separate power conditioners.
The special winding techniques used also ensure that the transformer modulates less than is normal (for other amplifiers) during the delivery of large amounts of current.
At the same time, this prevents mechanical vibrations from reaching the delicate audio signals on the PCB.
This technique reduces vibration from the transformer and therefore reduces mechanical noise from the cabinet.
The transformer is custom-made for the B-150PLUS, and is winded using a new technique.
The B-150PLUS delivers 100W in 8 ohm and 200W in 4 ohm.
All resistors are laser trimmed metal film from Vishay with a precision of 0.1%.
Unusually for an amplifier, not all of the capacitors are mounted in a capacitor bank, as some of them are located directly adjoining the output stage for faster power delivery.
The power supply is massive, consisting of a 750VA transformer and having a storage capacity of 130.000uF with 4 separate rectifiers, two of which are capable of 3.000VA.
All solderings are made in an artificial atmosphere, consisting of nitrogen, to avoid oxidation of the solderings.
The B-150PLUS is built using surface mounting techniques, and the components are mounted with a precision of 0.02mm (!) using silver solder.
As the B-150PLUS is a wide bandwidth design it goes to 400.000Hz, resulting in improved slew-rate.
The B-150 is, as with all other Densen amplifiers, The DMCD technology also secures an extremely firm grip on the speakers combined with a fast, precise and truly transparent sound.
This results in an unsurpassed precision and refinement, and the attenuator contains no less than 200 steps! This makes it possible to adjust the volume very precisely (0.5 dB) even when the sound is so low that an ordinary volume control would create an uneven balance between left and right.
The B-150PLUS output stage utilizes Densens unique DMCD (Densen Mass Current Distribution) technology.
Compared to a normal volume potentiometer of the kind used in the majority of all preamps, the resistor network has virtually no self induced noise and an extremely low distortion.
The volume is controlled by an extremely precise attenuator made of Vishay metal film resistors, which is switched by relays controlled by the microprocessor.
It is filled with advanced solutions, which all share the goal of giving you even more musicality and flexibility.
The new reference integrated amplifier from Densen is perhaps the most advanced integrated amp on the market