The bolted terminals and sleeves, like compression terminals and sleeves, are designed for termination of conductors.
Depending on the cross section of the vein, the number of bolts varies from 5 to 10.
All bolted terminals and connectors are marked indicating the allowable cable cross sections and manufacturer\'s code.
Weight: 0,404
Height: 45.5
Length: 133.5
Surface protection: EV000899
Number of screws: 3
Material: IEK_V0000333
bolt dimension metric (M..): 20х1,5
Moment of screw head failure during installation of line cabs: 62,2
Nominal cross section: 400
Operating voltage: 35000
Ambient temperature: -60...+80
Cross section form: EV010032
Colour insulation: EV000154
Width: 42.0.
In comparison with the location of the bolts on one side, the clamping of the cable core on different sides provides a more secure fixation of the conductor and increases the spot of electrical contact.
All products have conductivity according to GOST 17441-84.
At the tips of BL (bolted lug) break bolts are located in different planes at an angle of 180° to each other.
Moreover, their unquestionable advantage is a capability to be used for termination and connection of both copper and aluminum conductors.
A torque wrench is sufficient.
However they can be fixed without use of expensive equipment.
The bolted terminals and sleeves, like compression terminals and sleeves, are designed for termination of conductors
