TRITON RACK PODEA 27U 600X1000 GRI

Descriere YEO:

TRITON RACK PODEA 27U 600X1000 - Disponibil la horus-center.ro

Pe YEO găsești TRITON RACK PODEA 27U 600X1000 de la TRITON, în categoria Produse IT.

Indiferent de nevoile tale, TRITON RACK PODEA 27U 600X1000 GRI din categoria Produse IT îți poate aduce un echilibru perfect între calitate și preț, cu avantaje practice și moderne.

Caracteristici și Avantaje ale produsului TRITON RACK PODEA 27U 600X1000

• Departament: pc-periferice-software
• Accesorii și hardware pentru o experiență completă în domeniul IT și gaming.

Preț: 3148 Lei

Caracteristicile produsului TRITON RACK PODEA 27U 600X1000

• Brand: TRITON
• Categoria: Produse IT
• Magazin: horus-center.ro
• Ultima actualizare: 18-09-2025 01:36:55

Comandă TRITON RACK PODEA 27U 600X1000 Online, Simplu și Rapid

Prin intermediul platformei YEO, poți comanda TRITON RACK PODEA 27U 600X1000 de la horus-center.ro rapid și în siguranță. Bucură-te de o experiență de cumpărături online optimizată și descoperă cele mai bune oferte actualizate constant.

Descriere magazin:
Rigid construction RMA has a robust welded construction. High quality workmanship and the newest technologies ensure a perfect look of the cabinet. The skeleton rails have a new shape, are wider and made of 1.3 mm thick material. Flexible door opening The hinge system allows the door to open 165°. The door can be easily removed and re-mounted to change the direction of opening. The double wing doors are equipped with hook-on hinges. Glass The metal doors with glued glass are made of 4 mm thick tempered safety glass, which is resistant to common impacts. When broken, it forms a number of small fragments like automotive glass. For safety reasons, we recommend closing the door after installing the equipment in the cabinet to prevent collision with other objects. Used glass is tested in a certified testing laboratory and meet the requirements of ČSN EN 12150-1+A: Glass in construction – Thermally tempered soda-lime-silicate safety glass. The tested glass meets the standard for the disintegration of glass after breakage, Certificate of Conformity CQ-24- 2023, Test Protocol IKATES 58A-2024. Tritón handles We manufacture our own handles for the free-standing cabinets. By replacing the plastic module (not included), a half-cylindrical lock insert can be fitted. Patent: PUV 2013-27443 Adjustable vertical rails Vertical 19” rails can be adjusted freely in any depth of the cabinet. This simplifies mounting of the device and configuration of cables. Removable side panels and rear cover RMA has a welded frame and removable side panels. These are fixed as standard to the frame using a lock with the same key as the door and rear cover. Door for fan units With this cabinet type, it is possible to order a special metal door ready for mounting RAx-CH-X0x-X3 fan units. Further information is available in the section Active cooling. Break-out blanking panels Entry openings for cables are covered with breakout-type blanking panels. To prevent dust penetration, cables can be sealed in the opening with a brush strip, or simply secure by a protective fringe edge (both supplied with the cabinet). Opening for a fan unit A large opening covered with a breakout-type blanking panel enables mounting and removal of the Triton fan unit from the outside of the cabinet without the need of using screws. Castors, levelling feet, base The cabinet can be placed on levelling feet (included) or, with optional equipment, on a base, castors or heavy-duty castors with reinforcing frame. Rear side of the cabinet There are two cable entries on the rear wall of the cabinet covered with breakout panels. One is at the top and the other at the bottom edge of the cover. The other cable entries are on the ceiling and in the base of the cabinet. Perforation of the skeleton The RMA cabinets have a perforated skeleton to provide cooling air access to the installed technology. Cooling can be supported by the installation of fan units. Bonding All detachable parts are bonded together according to the requirements of the relevant standard. Flex frame (valid for 800 mm wide cabinets) The system allows the installation of sliding rails in 19”, 21” and 23” spans. Another option is to shift the 19” vertical rail spacing to one side to provide more space on the other side. Middle pair of vertical rails For enclosures deeper than 800 mm, a third pair of vertical rails for mounting the technology is supplied as standard. Thanks to their open profile, they do not restrict the installation of deeper equipment. Shorter devices can be mounted on the central vertical rail using different types of brackets (optional accessories). Wide skeleton rails The wide skeleton rails are designed for the additional installation of accessories, such as power distribution units or vertical cable management panels that do not occupy the 19” units inside cabinet. Thanks to the design, the power distribution panels do not limit the use of slide-out servers even in 600 mm wide cabinets. Accessories in skeleton rails The skeleton rails have mounting holes on the inner edges throughout their