View of the amplifierJust lever the case off...and take it out...to get access to the adjusting elements.
The set includes mounting screws.
The view of packagingDimensions [mm]ApplicationCA-215 Amplifier is used as distributing device in small or private antenna installations, to ensure proper level of signal for multiple receivers.
The amplifier allows to feed preamplifiers with 12 V voltage and maximum current of 60 mA, which is suitable for most typical antenna preamplifiers.
SpecificationsNameCA-215CodeR90461Outputs 2Frequency rangebandVHF UHF MHz40 - 400470 - 862GaindB24+/-222+/-1 Gain adjustment dB 16 12Output leveldBuV105 DIN45004B 99 IMD3 -60 dB 86 IMD2 -60 dB 86 CTB 80 CSO 89 XMODNoise figuredB< 4.5< 3Reflection attenuationdB> 10 Preamplifier feeding V / mA12/60PowerV230+/-10% 50/60 Hz VA5.5Example of application.
To avoid any possible damage, power should not be provided until all connections are properly made.
It is necessary to provide adequate ventilation.
It cannot be installed in wet conditions, nor near heaters and similar equipment.
It is not designed for use in open spaces.
Security notice for amplifier usersCA-215 amplifier is fed from internal stabilized power supply.
There is possibility of using additional preamplifier powered through the input of CA-215.
The amplifier is recommended in situations where signal level is low.
As there is an empty space in the working band, those networks can\'t use S30 - S38 channels.
The amplifier can be used in some cable networks and group installations.
Thanks to separate gain adjustment for VHF and UHF band, the levels can be set to fit the strength of the signals.
This makes it easier to do installations using single coax to send signals from all the antennas (combined by a diplexer/multiplexer).
The amplifier works in 40 - 400 MHz and 470 - 862 MHz bands.
View of the amplifierJust lever the case off...and take it out...to get access to the adjusting elements.
The set includes mounting screws.
The view of packagingDimensions [mm]ApplicationCA-215 Amplifier is used as distributing device in small or private antenna installations, to ensure proper level of signal for multiple receivers
