Caracteristici tehnice
Special presence sensors for work areas
Suitable for meeting rooms, classrooms, open areas, etc.
ceiling mounted
360° passive infrared detection with high density lens range 8 m
IP 20
Consum 0.5 W
Optimum distance between two sensors: 6 m
Fixes directly in suspended ceiling with springs (supplied) or is installed in a 50 mm deep Batibox
Surface mounted on ceiling using accessory Cat.
No 0 488 75
Connection by KNX red/black connector
Caracteristici generale
Lighting Management - BUS/KNX sensors
Constantly check for presence and light levels, switching OFF as soon as the natural light level is sufficient Switch ON and OFF automatically
Accurate set-up on site with configuration device
Connected directly to BUS/KNX cable (supplied with tap-off connector)
The detector must be programmed using ETS software.
Caracteristici tehnice
Special presence sensors for work areas
Suitable for meeting rooms, classrooms, open areas, etc.
ceiling mounted
360° passive infrared detection with high density lens range 8 m
IP 20
Consum 0.5 W
Optimum distance between two sensors: 6 m
Fixes directly in suspended ceiling with springs (supplied) or is installed in a 50 mm deep Batibox
Surface mounted on ceiling using accessory Cat.
No 0 488 75
Connection by KNX red/black connector
Caracteristici generale
Lighting Management - BUS/KNX sensors
Constantly check for presence and light levels, switching OFF as soon as the natural light level is sufficient Switch ON and OFF automatically
Accurate set-up on site with configuration device
Connected directly to BUS/KNX cable (supplied with tap-off connector)
The detector must be programmed using ETS software
