Skyrc Nc2500 Pro AA / AAA Charger The Skyrc Nc2500 Pro Charger allows not only charging AA and AAA batteries, but also regenerating them.
You no longer have to wait too long for your smartphone to be ready for use! In the box BD350 battery disCharger / tester XT60 connection cable Brand Skyrc Model Nc2500 Pro Input DC 12V / 3A Battery type NiMH / NiCD Battery size AA / AAA Charging intensity 0.1-2.5A Discharge current 0.1-1.5A Discharge cutoff voltage 0.8-1.0V (adjustable) USB output QC3.0 5V / 3A, 9V / 2A, 18W max ±5% - △V: 1-8mV (adjustable) Current (trickle) 30-99mA / OFF Temperature protection 55-65°C (adjustable) Operating temperature From 0°C to 40°C Ambient humidity during operation 0-75% Storage temperature From -10°C to 70°C Ambient humidity during storage 0-75% Display LCD Dimensions 148 x 135 x 65mm Weight 600g.
This makes the Charger perfect for a variety of scenarios.
It also provides voltage and current at 5V / 3A and 9V / 2A.
The device is equipped with an additional USB port and supports QC2.0 / QC3.0 fast charging.
Additional USB port - fast charging With the Nc2500 Pro Charger you can also charge your phone in a short time.
In this way you will prepare them for the next races and gain confidence that they will not let you down! Bet on proven solutions and achieve better and better results.
It allows you to run-in model motors that have not been used for a long time.
The device offers an additional run-in function.
In this way, it will protect the battery from overheating! Run-in function The Nc2500 Pro is more than just a charger.
The Charger uses an innovative FlexiPulse algorithm that prevents similar problems! When the device detects that the cell\'s internal resistance increases above a certain level during charging, it will automatically reduce the amperage to maintain the right temperature.
Just take a look! Effective protection against overheating Don\'t worry that your battery will overheat and be damaged.
On the screen you will also find information about the current operation mode and elapsed time.
The Charger is also equipped with an easy-to-read display, so you can check the current amperage, voltage and capacity for each channel at any time.
So you can take even better care of the condition of your batteries and enjoy their optimal performance! Easy operation Convenient operation of the device is enabled by a special dial.
The Charger also offers a special Step Charging mode, which allows you to adjust the amperage for successive charging steps.
The device is equipped with 6 slots and offers a maximum current of 2.5A.
All this will allow you to optimize the operation of your batteries, take care of their condition, and even protect them from wear and tear or damage! Charge 6 batteries simultaneously With the Nc2500 Pro you can charge up to 6 batteries simultaneously.
In this way you will extend their life! A brake-in function is also available.
This way you can not only charge the batteries of your choice, but also discharge or regenerate them.
As many as 4 available features The Nc2500 Pro offers as many as 4 modes of operation.
You also have a USB port that supports QC 3.0 fast charging, and the Charger is equipped with 6 battery slots.
The device offers several different modes of operation, and has the added advantage of a run-in function that allows you to run-in model motors that have not been used for a long time.
Skyrc Nc2500 Pro AA / AAA Charger The Skyrc Nc2500 Pro Charger allows not only charging AA and AAA batteries, but also regenerating them
