ConceptThe body of plug was lathed in one piece to avoid the signal and conduction loss.
The interface was continued with hollow design to maintain the insertion force and crosscutting part was showed with spiral pattern for trendy design. screw for conductor (3/4 mm) (4 each)screw for cable (3/4 mm) (4 each)Material:Body: Tellurium Copper (#C14500 / copper contains over 99%)Head lock: POMRing: Brass alloy (#C3604) Shell: Brass alloy (#C3604)Screw for conductor: Brass alloy (#C3604)Screw for cable: IronFinished:ABP-1111Body: 10u Gold plating (no nickel base)ABP-1111SBody: 120u Silver plating (no nickel base)ABP-1111RBody: Rhodium plating (no nickel base)Head lock: NoneABP-1111Ring: 3u Gold plating (no nickel base)ABP-1111S / ABP-1111RRing: 120u Silver plating (no nickel base)Shell: Logo lathing / Hairline surface treatment / Satin nickel platingABP-1111Screw for conductor: 3u Gold plating (no nickel base)ABP-1111S / ABP-1111RScrew for conductor: 120u Silver plating (no nickel base)Screw for cable: Nickel plated.
Electrical Characteristics:Contact resistance0.3 mOhm (It was test by ABI-0601.)Dimension:Biggest OD 09.0mmCable hole with sleeve 04.5mmCable hole without sleeve 06.5mmTotal Length 43.0mmPacking:Vacuum Bag(4Pcs/1Set).
The interface will adjust the shape into a perfect size basic onthe binding post.
Please insert with clockwise. 6.
Please lock the screw and cable together.
NOTE:This product is only suitable for 4.0mm binding post.(Not for 4.1mm) The first time when you put the Banana plug and thebinding post together, it might be a little bit tight. 4.2.
For screw type:Please lock the cable (without jacket) in the ring with a screw.5.
Please lock the shell and head lock together. 3.
Please put the cable through the shell4.1.
For solder type:Please remove the ring and the screw first before you solder the cable (without jacket) on L shape crosscutting.
But if the cable OD is more than 4.3mm, please remove the sleeve.
A ring and a screw were permanent locked so that you can basic on your need to adjust into solder type.
After you put POM head lock and shell together, it will insulate from inside.
Assembly:1.
We recommend to peel off the cable jacket about 6mm.2.
This product is suitable for cable OD which is less than 6.3mm.
A special design body was locked with POM head lock.
The conductor was used by high-purity copper (Tellurium Copper) without nickel plated.
Mechanical structure: The body of plug was lathed in one piece.
It has hollow design to provide strong insertion force.
We use plastic material between shell and body for insulator to avoid conduction loss.
It will be used for solder type or screw type.
Terminal was crosscutting in L shape and a ring with screw.
ConceptThe body of plug was lathed in one piece to avoid the signal and conduction loss.
The interface was continued with hollow design to maintain the insertion force and crosscutting part was showed with spiral pattern for trendy design
