Front viewRear viewThe included accessoriesView of the packagingThe PoE Switch TL-SG1008P is a desktop device enabling smooth data transmission in 10/100/1000 Mbps Ethernet networks. 5 or 5e (up to 100 m)STP EIA/TIA-568 100 Ω (up to 100 m)1000Base-T:UTP category 5, 5e, 6 (up to 100 m)EIA/TIA-568 100&Omega
STP (up to 100 m)LED indicatorsPower, Link/Act, 1000M, PoE Status, PoE MAXCertificatesFCC, CEDimensions [mm]171x98x27EnvironmentOperating temperature range: 0...40 °
CStorage temperature range: -40...70 °
COperating humidity range: 10...90 %, (no condensation)Storage humidity range: 5...90 %, (no condensation)Power230 VAC / 48 VDC (1.25A). 3, 4 or 5 (up to 100 m)STP EIA/TIA-568 100 Ω (up to 100 m)100Base-Tx:UTP cat.
This desktop device is a great selection for expanding home or office network, especially when there is a need to use PoE equipment.
Distinguishing features:Four PoE ports (each of them ensuring communication and power supply for a network device via a single UTP cable)No need for installation or configurationMax capacity of each PoE port: 15.4 WTotal PoE capacity: 53 WSupport for (PD) PoE devices compliant with IEEE802.3af standardSupport for bandwidth control in full duplex (IEEE802.3x) and a back-pressure function in half-duplex modeSupport for auto-learning and auto-aging, 8k MAC address entriesLED indicators providing information on status/speed/activity/PoESpecifications:NameTP-LINK TL-SG1008PCodeN29931Standards and protocols
IEEE802.3, 802.3u, 802.3ab, 802.3x
CSMA/CD, TCP/IPCore functions/featuresGigabit Ethernet switchSupport for PoE (PD) devices compliant with IEEE 802.3af standardAuto-learning and auto-aging (8k MAC address entries)Support for bandwidth control in full duplex (IEEE802.3x) and a back-pressure function in half-duplex modeInternal data throughput16 Gb/sMAC table8kPorts8 x RJ45 10/100/1000 Mb/s (auto-negotiation; auto MDI/MDIX)
Transmission mechanismStore-and-ForwardPorts8 x RJ45 10/100Mb/s (auto-negotiation, auto MDI/MDIX)Cabling requirements10Base-T:UTP cat.
It requires no installation or configuration. 10 W) to the port 3, the Switch cuts off power to the port 4 (for the device with the lowest priority), to preserve the total power capacity of 53 W.
The TL-SG1008P Switch is easy to install and use.
After connecting another device (consuming e.g.
An example: ports 1,2 and 4 provide 15.4 W each (the maximum values), giving in total 46.2 W (PoE LED lights up red).
This feature ensures an interrupted power supply for the most important PoE components of the system in case of overloading (they should use the PoE ports with lower numbers).
In case of overloading, the Switch will cut off the power to devices connected to ports with lower priority.* Remark: order of priority: port-1 > port-2 > port-3 > port-4.
The maximum power consumption (by all the PoE devices) cannot exceed 53 W.
This feature allows the user to expand the network coverage in areas where there is no access to AC power lines/outlets and to employ access points, IP cameras, IP phones, etc.
The Switch has the priority* function which helps protect main functions of the system in case of overloading.
The Switch automatically detects PD devices compliant with IEEE 802.3af standard and provides them with power supply.
Its eight RJ45 ports support auto-negotiation function, four of them provide power over Ethernet (PoE function).
Front viewRear viewThe included accessoriesView of the packagingThe PoE Switch TL-SG1008P is a desktop device enabling smooth data transmission in 10/100/1000 Mbps Ethernet networks
